Disperse static electricity from an operator the moment they step on the mat and safely away from sensitive equipment.

5/31" thick electrically conductive diamond plate surface with a resilient sponge base.

9/16" overall thickness with beveled edges.

Resistivity: Less than 106 OHMS, test method ESD-S7.1 1994.

Conductive matting should always be used with a ground cord, and the surface kept clean.

Prevent the accumulation of static electricity by quickly draining it from operators and eleminate the hazards of data loss or the damaging of microcircuitry equipment.

1/8" thick conductive smooth surface with a resilitnt sponge base.

1/2" overall thickness with beveled edges.

Resistivity: Less than 106 OHMS, test method ESD-S7.1 1994.

Conductive matting should always be used with a ground cord, and the surface kept clean.

Provides reliable long term protection from static discharge and personnel discomfort in manufacturing area. 3/32" thick static dissipative smooth surface with a resilient closed cell polymeric sponge base.

Your choice of 1/2" or 7/8" overall thickness with beveled edges.

Resistivity: Less than 10⁷ OHMS, test method ESP-57.1 1994

Drain harmful static electricity from personnel, safeguard sensitive electronic equipment.

1/8" thick static dissipative corrugated surface with a resilient sponge base.

1/2" overall thickness with beveled edges.

Resistivity: Less than 10⁸ OHMS, test method ESD-S7.1 1994.

Conductive matting should always be used with a ground cord.