PERMA - COTE:

HIGH GLOSS CHEMICAL AND ABRASION RESISTANT EPOXY FLOOR COATING.

 

DESCRIPTION:

PERMA - COTE IS A TWO COMPONENT EPOXY POLYAMIDE COATING SYSTEM DESIGNED TO PROVIDE A HEAVY DUTY GLOSS FINISH TO CONCRETE FLOOR AREAS.  PERMA - COTE  IMPARTS A CHEMICALLY RESISTANT, HARD, DURABLE FINISH NOT ATTAINABLE WITH A CONVENTIONAL RESIN MATERIAL. 

 

PERMA - COTE IS SUPPLIED AS A TWO COMPONENT SYSTEM WITH AN EXTENDED POT LIFE.  THIS PERMITS A UNIQUE 8 HOUR APPLICATION PERIOD AFTER MIXING.  PERMA - COTE  WILL THEN CURE TO A FULL GLOSS FINISH.

 

RECOMMENDED USES:

PERMA - COTE  SUPPLIES OUTSTANDING HARDNESS, DURABILITY, CHEMICAL AND ABRASION RESISTANCE, PERMA - COTE IS PARTICULARLY SUITABLE FOR WAREHOUSE AND FACTORY FLOORS, ELECTRONIC MFG. AREAS, FOOD PROCESSING PLANTS, PHARMACEUTICAL PLANTS, BOILER ROOMS, SEWERAGE  INSTALLATIONS ETC.

 

IS AVAILABLE IN A NON-SLIP FORMULATION FOR STAIRWELLS, SHIPPING AREAS, LOADING DOCKS ETC.

 

CHEMICAL RESISTANCE:

24 HOUR CONTACT

NITRIC ACID                                                                       10%                                        UNAFFECTED

SULPHURIC ACID                                                              10%                                        UNAFFECTED

HYDROCHLORIC ACID                                                     30%                                        UNAFFECTED

CITRIC ACID                                                                       15%                                        UNAFFECTED

PHOSPHORIC ACID                                                           85%                                        UNAFFECTED

LACTIC ACID                                                                      25%                                        UNAFFECTED

SODIUM HYDROXIDE                                                      30%                                        UNAFFECTED

 

60 DAY CONTACT

LYE                                      UNAFFECTED

MINERAL SPIRITS                 UNAFFECTED

GASOLINE                          UNAFFECTED

FUEL OIL                             UNAFFECTED

HYDRAULIC FLUID                 UNAFFECTED

ALCOHOL                             UNAFFECTED

CHLOROX                             UNAFFECTED

 

 

MIXING:

A) PRIME COAT - MIX 1 PART PERMA - COTE MIX A WITH 1 PART PERMA - COTE MIX B AND       1 PART TOPSOLV 100 AVAILABLE FROM E.L.S. PRODUCTS CORP.

 

B) FINISHING COAT - MIX 1 PART PERMA - COTE MIX A WITH 1 PART OF PERMA - COTE               MIX B

 

C) APPLY PRIME COAT 1 DAY PRIOR TO THE FINISHING COAT. 

 

SURFACE PREPARATION:

ON DENSE STEEL TROWELED CONCRETE CLEAN AND ETCH WITH E.L.S. ACI-CLEAN  AVAILABLE FROM E.L.S. PRODUCTS CORP. OR CLEAN AND DEGREASE WITH ALL PRO AVAILABLE FROM E.L.S. PRODUCTS CORP. AS JOB CONDITIONS WARRANT TECHNICAL SERVICE IS AVAILABLE FROM E.L.S PRODUCTS CORP.

 

METHOD OF APPLICATION:

PHONELIC CORE ROLLER, SPRAY OR BRUSH.

 

CLEAN UP:  

CLEAN TOOLS AND EQUIPMENT IMMEDIATELY AFTER WITH TOPSOLV 100 FROM E.L.S. PRODUCTS CORP.

 

COVERAGE:

PRIME COAT - 225 TO 250 SQ. FT. PER GALLON DEPENDING ON POROSITY.

FINISH - 300 TO 350 SQ. FT PER GALLON

 

PACKAGING:

10 GAL UNITS ( 1-5 GAL PERMA - COTE MIX A 1-5 GAL PERMA - COTE MIX B )

2 GAL UNITS ( 1-1 GAL PERMA - COTE MIX A 1-1 GAL PERMA - COTE MIX B )

Copyright 2006 ELS Products Corp | Homepage | Site Map | Web Design by NYLI