|
WATER BASE PRIMER FOR SHEETROCK, PLASTER AND CEMENT
PROTECT FROM FREEZING ~ DO NOT APPLY WHEN
AIR OR SURFACE TEMPERATURE IS BELOW 45 DEGREES F.
CAUTIONARY INFORMATION:
DO NOT USE THIS PRODUCT BEFORE
READING THE MATERIAL SAFETY DATA SHEET. FOR INDUSTRIAL / PROFESSIONAL
USE ONLY. DO NOT TRANSFER TO UNMARKED CONTAINERS. KEEP OUT OF REACH OF
CHILDREN.
SPECIAL PROTECTION
INFORMATION:
RESPIRATORY PROTECTION:
IF TLV OF PRODUCT IS EXCEEDED, A
NIOSH / MESA JOINTLY APPROVED SELF-CONTAINED BREATHING APPARATUS WITH A FULL
FACE PIECE OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE NIOSH / MESA
RESPIRATORS UNDER SPECIFIED CONDITIONS. (SEE YOUR SAFETY EQUIPMENT SUPPLIER.)
VENTILATION:
PROVIDE SUFFICIENT MECHANICAL (GENERAL) AND / OR
LOCAL EXHAUST VENTILATION TO MAINTAIN EXPOSURE BELOW TLV’S.
PROTECTION GLOVES:
WEAR RESISTANT GLOVES SUCH AS BUNA-N.
EYE PROTECTION:
CHEMICAL SPLASH GOGGLES IN COMPLIANCE WITH
OSHA REGULATIONS ARE ADVISED; HOWEVER, OSHA REGULATIONS ALSO PERMIT OTHER TYPE
OF SAFETY GLASSES. (SEE YOUR SAFETY EQUIPMENT SUPPLIER.)
SPECIAL PRECAUTIONS:
CONTAINERS OF THIS MATERIAL MAY BE
HAZARDOUS WHEN EMPTIED. SINCE EMPTIED CONTAINERS RETAIN RESIDUES (VAPOR,
LIQUID, AND / OR SOLIDS) ALL HAZARD PRECAUTIONS GIVEN ON THIS LABEL MUST BE
OBSERVED. KEEP OUT OF REACH OF CHILDREN.
DIRECTIONS:
APPLY BASECOTE AS SUPPLIED, BY ROLLER, BRUSH OR
SPRAY. ALLOW AREA TO DRY OVERNIGHT BEFORE APPLYING FINISH COATS. MAY BE
APPLIED TO A DAMP SURFACE BUT DRY IS BEST. SURFACES TO RECEIVE BASECOTE MUST
BE FREE OF OIL, GREASE, DUST AND ALL FOREIGN MATTER.
COVERAGE:
250 TO 350 SQUARE FEET PER GALLON DEPENDING UPON
THE POROSITY OF THE SURFACE.
CLEAN-UP:
CLEAN TOOLS AND EQUIPMENT IMMEDIATELY AFTER USE
WITH WATER.
DO NOT USE BELOW 50
DEGREES F.
|
